Bracket Installation Guide

The bracket is used to fix the anchor securely on a wall, pillar, or other surface. Proper installation affects UWB signal quality directly. It is very important to keep enough space between the anchor and the wall.

By following this guide, you can optimize anchor performance and maintain a stable environment for long-term operation.

1. Package Contents

• Bracket × 1

• Bolt & Nut × 2 sets

• Double-sided Tape × 1

• Cable Tie × 2

Some items may not be used depending on the installation method.

2. Installation Steps

Step 1. Fix the Anchor

• Attach the anchor to the bracket.

• Use bolt & nut or cable ties to secure it firmly.

Step 2. Apply Double-sided Tape

• Stick the provided double-sided tape to the back of the bracket.

• Press the bracket against the wall to attach it.

Step 3. Final Positioning

• Place the bracket at the desired position.

• Make sure the anchor is kept horizontal after installation.

3. Important Notes

Keep a Gap Between the Wall and the Anchor

• Maintain about 10 cm (100 mm) between the anchor front and the wall surface.

• This helps to reduce UWB signal loss or reflection and ensures the best transmission quality.

Ensure Strong Fixing

• If you only use cable ties, the bracket may shake.

• It is recommended to use bolt & nut + double-sided tape together for stronger fixing.

Signal quality may vary depending on the wall material and nearby obstacles. Please test the signal first and confirm the final position.