> For the complete documentation index, see [llms.txt](https://freegrow-1.gitbook.io/product-docs-en/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://freegrow-1.gitbook.io/product-docs-en/en-creator-kit-q1/uwb-q1-complete-setup-and-usage-guide/installation-guide/anchor-setup.md).

# Anchor Setup

Complete UWB Anchor Setup and Installation at Once

### In This Guide

You'll learn how to use the **GrowSpace UWB Web Console** to set the PAN ID, coordinates, and role of each Anchor, and how to complete the physical installation to build an indoor **RTLS (Real-Time Location System)**.

***

### Before You Start

#### Hardware

<table><thead><tr><th width="273.20001220703125">Item</th><th>Description</th></tr></thead><tbody><tr><td>GrowSpace UWB Tag</td><td>UWB Anchor</td></tr><tr><td>Windows PC</td><td>Windows 10 or later recommended</td></tr><tr><td>USB Cable</td><td>USB Type-A to Type-C</td></tr></tbody></table>

#### Software

| Item                  | Description                                                                                                                                             |
| --------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------- |
| GrowSpace Web Console | <https://grow-space.io/software/>                                                                                                                       |
| USB to UART Driver    | [CP210x VCP Driver Installation Guide](https://freegrow-1.gitbook.io/product-docs-en/en-creator-kit-q1/learn-more/cp210x-vcp-driver-installation-guide) |

***

### Connecting the Anchor and Checking Recognition

* Connect the UWB Anchor to your PC using a USB cable.

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FXtCiZdBtAyBwJQu09x8f%2Fimage.png?alt=media&amp;token=7d235a89-eb83-4993-9ecf-d2b3711e0ede" alt=""><figcaption></figcaption></figure>

* Open [the **GrowSpace Web Console**](https://grow-space.io/software/).

{% hint style="info" %}
You must use the Chrome browser.\
Other browsers may have limited support for device connection or serial port access.
{% endhint %}

* In the left sidebar, click **“Anchor, Tag, Listener Setup Program” → “Web Program”**.

{% columns %}
{% column %}

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2Fh0ua2rHl5GQhzhvqEJRS%2F1.png?alt=media&amp;token=ed342593-4094-4607-8ad8-12ae301e6ee3" alt=""><figcaption></figcaption></figure>
{% endcolumn %}

{% column %}

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2F9mo1s6ThWYOPvUTSQQ9Y%2F2.png?alt=media&amp;token=e6d331ac-541a-4613-9dd6-eee5998a88c2" alt=""><figcaption></figcaption></figure>
{% endcolumn %}
{% endcolumns %}

* The setup screen will appear.

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FqsRlyEHuHjooegzatyUP%2Fimage.png?alt=media&amp;token=639b0bda-e8d5-4666-aefe-cfe5430bdf10" alt=""><figcaption></figcaption></figure>

* Click the **\[Connect]** button.
* From the list of available COM ports, select the UWB device.

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FQUuhm651n87nOSCeTQYK%2Fimage.png?alt=media&amp;token=bbeab04c-516d-41d8-8dfe-8580173313ac" alt=""><figcaption></figcaption></figure>

* When the device information appears on the screen, the connection is complete.

{% hint style="info" %}
Please make sure to use **Google Chrome**.\
Other browsers may not support device connection properly.
{% endhint %}

### What to Do If the Device Is Not Recognized <a href="#undefined-6" id="undefined-6"></a>

{% hint style="warning" %}
If the device is not connecting to your PC or doesn’t appear in the port list, please check the following steps:

* **Try using a different USB cable.** In some cases, a faulty cable may prevent the device from being recognized properly.
* **Try connecting to a different USB port.** Some ports may not work as expected, so switching ports can help.
* Make sure the **CP210x VCP driver** is installed. This is especially important for Listener devices, which require the driver for proper port recognition.
* If the driver is not installed yet, please refer to the guide below: [→ \[CP210x VCP Driver Installation Guide\]](https://freegrow-1.gitbook.io/product-docs-en/en-creator-kit-q1/learn-more/cp210x-vcp-driver-installation-guide)<br>
  {% endhint %}

***

### PAN ID Setup

* After connecting, enter the PAN ID value in the input field.\
  Example: `0x0000`

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2Fl29sRzOJansOtZ4uwUwE%2Fimage.png?alt=media&amp;token=10ffccde-12a6-47a1-a7d9-f67e6c424702" alt=""><figcaption></figcaption></figure>

* All Anchors in the same system **must use the same PAN ID**.

#### What is a PAN ID?

* A unique ID used to identify each RTLS network
* Only devices with the same PAN ID can communicate via UWB
* Used to define a single RTLS group within a space

***

### Set Coordinates and Role

#### Initiator Anchor

* The Anchor used as the reference point for RTLS calculations
* Only one Initiator must be set, and it serves as the Trigger signal sender within the system.

How to Set Up:

* While the device is connected, check the **Initiator** checkbox to enable it.

  <figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FRJOU0VY7mr71p4K2rFQH%2Fimage.png?alt=media&amp;token=28f420f6-832c-4213-ae45-d40c6aa32891" alt=""><figcaption></figcaption></figure>
* Enter the X, Y, and Z coordinates based on actual measured distances (unit: mm).
  * Example: X: `15000`, Y: `0`, Z: `3000`

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FYpmFeAbzBA8fiISTVVkU%2Fimage.png?alt=media&amp;token=4da0a092-46aa-429f-8833-cd4a0cc56e60" alt=""><figcaption></figcaption></figure>

* Once all values are entered, click the **\[Save]** button.
* Then, connect the next Anchor and repeat the same steps.

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FgAziwYt2sfeOZnxFVexP%2Fimage.png?alt=media&amp;token=17408d56-ae35-4288-a898-6d68810ed308" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
If you need to remove previous settings, you can use the **\[Factory Reset]** feature to restore the device to its default state.
{% endhint %}

***

### Physically Install the Anchor

Example Installation Methods

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2Fijqba6P1stli2Q1H3GEX%2Fimage.png?alt=media&amp;token=6cc1765a-98b8-4e84-8237-91b512d52eca" alt=""><figcaption></figcaption></figure>

<table><thead><tr><th width="146.20001220703125">Installation Type</th><th width="189.7999267578125">Environment</th><th>Method</th></tr></thead><tbody><tr><td>Wall Mount</td><td>Office space</td><td>Fixed with screws, keep level, organize cables</td></tr><tr><td>Ceiling Mount</td><td>Factory, warehouse</td><td>Use brackets or cable ties</td></tr><tr><td>Pole Mount</td><td>Narrow spaces</td><td>Use double-sided tape or Velcro</td></tr></tbody></table>

#### Installation Tips

* Secure the device firmly to prevent shaking or tilting
* Avoid installing near materials that may interfere with signals, such as metal, glass, or pillars
* Organize power and signal cables neatly for easier maintenance
* After installation, always check signal reception and LED status

***

### Connect Power and Check Operation

* Prepare a USB Type-C adapter that supports the recommended voltage and current
* Connect it to the Anchor's power port
* Check the LED to confirm that the device is powered on

{% hint style="info" %}
Using an adapter with lower output than the recommended specs may cause unstable power or disconnection issues.
{% endhint %}

#### LED Status Table

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FJfXe0YPGyBlcMGHPoSp5%2Fimage.png?alt=media&amp;token=1593a7b1-ad5d-4558-a691-c4b281955c33" alt=""><figcaption></figcaption></figure>

| Status                                           | Meaning          | What to Check                                 |
| ------------------------------------------------ | ---------------- | --------------------------------------------- |
| <mark style="color:green;">●</mark> Green LED On | Normal operation | Device is connected and settings are complete |
| <mark style="color:red;">●</mark> Red LED On     | Network error    | Check PAN ID or Initiator settings            |
| No LED                                           | No power         | Check cable or adapter connection             |

<table data-card-size="large" data-view="cards"><thead><tr><th></th><th></th><th data-hidden data-card-cover data-type="files"></th></tr></thead><tbody><tr><td>No LED</td><td></td><td><a href="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2Fosb3ZK8fBaLTw33x512v%2FSE-0ae922dc-8421-4f28-9d7d-2ab9ea6a2bae.png?alt=media&amp;token=aa0f5fa5-4411-4722-b8d2-9f06167e0937">SE-0ae922dc-8421-4f28-9d7d-2ab9ea6a2bae.png</a></td></tr><tr><td>Green LED On</td><td></td><td><a href="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FkCPxSWNDdcuUv2a9mrco%2FSE-f0840961-5b81-4e29-847a-b7fc37d17ec6.png?alt=media&amp;token=ff5b0494-0974-4204-9870-0a26eb536dff">SE-f0840961-5b81-4e29-847a-b7fc37d17ec6.png</a></td></tr></tbody></table>

***

### Final Check After Installation

<table><thead><tr><th width="210.79998779296875">Item</th><th>What to Check</th></tr></thead><tbody><tr><td>Device Recognition</td><td>Make sure all Anchors are recognized correctly in the Web Console</td></tr><tr><td>Coordinate Input</td><td>Verify that X, Y, and Z coordinates are entered accurately</td></tr><tr><td>Initiator Setting</td><td>Confirm that only one Initiator is set</td></tr><tr><td>LED Status</td><td>Check that all devices are operating normally (green LED is on)</td></tr><tr><td>Position Response</td><td>Move the Tag and check if location data is being updated correctly</td></tr></tbody></table>

***

## 💻 You Can Also Use the Installation Program!

GrowSpace Anchors can be configured not only through the Web Console, but also using the dedicated setup program (**GrowSpace Developer Tool**). We recommend using the setup program for more advanced configuration or when working in an offline environment.

#### **How to Install the Setup Program**

* On your PC, go to: <https://drive.google.com/file/d/1L76hj_xsFe_flzxv6n_Svr73HJntvUxe/view?pli=1>&#x20;
  * Installation file: `uwb_settings.exe`

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FyC1UUKLprkGuN78XFdWy%2Fimage.png?alt=media&amp;token=f89731de-d776-48a4-80b4-16b13bf5e5db" alt=""><figcaption></figcaption></figure>

* If a security warning appears, click **\[More info → Run anyway]** to continue the installation.

{% columns %}
{% column %}

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FdiBxdDuVulFxM9yuaIwk%2Fimage.png?alt=media&amp;token=5841bc6a-978d-4a18-b54f-aa099128b385" alt=""><figcaption></figcaption></figure>
{% endcolumn %}

{% column %}

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2FuSskCS2EwiXr5aBiPjMU%2Fimage.png?alt=media&amp;token=c08673b0-b10f-46d6-b28e-ff7e4f324906" alt=""><figcaption></figcaption></figure>
{% endcolumn %}
{% endcolumns %}

* After installation is complete, launch the program and connect the Anchor to begin configuration.
* GrowSpace Anchors can be configured the same way using either the **Web Console** or the **Setup Program**. In the Setup Program, settings are managed through the screen shown below.

<figure><img src="https://3958108398-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTvMRdsyzmLItN6oczCyF%2Fuploads%2Fbw4IID2RC7Ccq2Cqwrrl%2Fimage.png?alt=media&amp;token=238188b9-3e49-44f1-bee4-af5321be7df3" alt=""><figcaption></figcaption></figure>

#### 🧾 Main Setting Items

* **Type: Anchor**\
  → Check if the connected device is correctly recognized as an Anchor.
* **PAN ID Setting** (top left)\
  → All Anchors in the same system must use the same PAN ID. After entering the value, click **\[Save]** to apply the setting.
* **Initiator Setting** (center)\
  → Enable the checkbox if this Anchor will act as the Initiator. Only **one** Initiator is allowed per system.
* **Position** Coordinates (X / Y / Z)\
  → Enter the Anchor’s actual installed position in millimeters.\
  Example: `X: 2400, Y: 0, Z: 0`

> 💡 Entering accurate position information improves the coordinate accuracy of Tags during operation.